|
|
Tray Extenders
Tray extenders are pieces of wire 48 inches long, that
wrap around and weave into the trays effectively increasing
the racks drying capacity. any number of tray extenders
can be used on a tray. Tray extenders can only be mounted
on either the sides or the front. The sheet cannot hang
over both the front and sides as the Rubber Feet would
fall on the sheet being dried.
| Fig. A |
Fig. B |
 |
 |
Tray Extenders weave into the tray,
figure A. Pass the extender over the outside wire (1),
under the next interior wire (2) and hook on the second
internal wire (3). Several extenders can be mounted
to accommodate different sizes (figure B). Two ends
can be placed closed together for a long reach, or farther
apart for short support. It is advisable to have at
least two extenders supporting the sheet.
|
